GREEN ROOF SYSTEM SOLAR GREEN ROOF SOLAR TOP
OPTIGRÜN-SOLAR TOP is a specially developed system for retrofitting photovoltaic modules on extensively greened flat roofs. The system is particularly suitable for existing buildings with limited structural reserves. It can be used on both small and large roof areas and up to a maximum roof pitch of 5°.
The system can be completely dismantled and removed for temporary use or later conversion of the building. The substructure is load-bearing and does not require penetration of the roof waterproofing.
Ecological value | ![]() | ||||||
Maintenance costs | ![]() | ||||||
|
|
* From 500 modules, net, material (base unit, feet, module clamps) including installation, without PV modules, without ballast.
Features of the Solar TOP
- PV retrofit for existing green roofs - space-saving, structurally efficient and removable.
- Maintenance possible through accessible walkways - this reduces costs and ensures long-term operation.
- Eligible for subsidies and compliant with regulations: PV add-on without loss of the degree of greening.
- Quick and easy to install - thanks to pre-assembled components.
- Full preservation of the vegetation, no shading of the modules by vegetation, no ballast on the greenery.
- Planning reliability thanks to property-specific support and clear documentation.
- Electricity production at grid-relevant times of day - economical, low ballast and optimally integrated in landscape format.
- Simple ballasting - with locally available standard building materials.
- Expandable as required - additional ballast for special requirements.
- Modular and flexible - adaptable to any roof geometry.
- Electricity and nature - efficiently combined on one roof surface.
Optigrün Solar TOP advantages
OPTIGRÜN-SOLAR TOP has maintenance and care paths that run along the high and low points of the module rows. Only through these accessible aisles (high and low points) is professional maintenance and inspection of the green roof and the PV system possible at all. The safe accessibility of all maintenance points makes regular inspection, maintenance and care measures much easier. This not only reduces maintenance work, but also permanently lowers operating costs and ensures the long-term technical availability of the entire system.
Many development plans and funding guidelines for public programmes stipulate a minimum level of green roof coverage. This requirement remains fulfilled with the use of OPTIGRÜN-SOLAR TOP, as the green roof area is hardly reduced by the system. The avoidance of covering the vegetation ensures eligibility for subsidies and authorisation, even in the case of subsequent PV installation.
Where can Solar TOP be used optimally?
The Optigrün Solar TOP system is a specially developed system for retrofitting photovoltaic modules on extensively greened flat roofs.
- Existing buildings with extensive green roofs
- Commercial and industrial buildings with suitable flat roofs
- Residential buildings with a sustainable energy concept
System structure solar green roof Solar TOP
Note: Click on the marked points to obtain further information!

Photovoltaic module
- Make freely selectable
Solar mounting Solar TOP
- Load-supported solar mounting consisting of base rail, mounting brackets, clamping brackets and associated module clamps
Base Solar TOP
Base incl. locking device for mounting the solar mounting.
Ballasting
Standard construction materials - paving stones and paving slabs.
Can be optionally extended with ballast profiles.
Module clamps
End clamp or centre clamp - depending on the installation situation
Technical data
Weight | from 15 kg/m2 |
Build-up depth | approx. 499 mm |
Roof pitch | 0-5° |
Module inclination | 10° |
Alignment | east-west |