PITCHED ROOF 15-45°
Greening pitched roofs with anti-slip system T (Carrier)
Pitched roofs, especially those with wooden roof constructions, often have only limited load reserves. Green roofs on these pitched roofs are therefore usually designed as thin-layer extensive green roofs.
The anti-slip system T is suitable for green roofs on all monopitch and pitched roofs up to a roof pitch of approx. 45° - as for our green roof system pitched roof 15-45°. It is very robust and can be easily walked on during installation. This makes it easier to install on steep surfaces with a roof pitch of over 40°.
Made from recycled plastic
The anti-slip system T is made of rot-resistant recycled plastic. The simple plug-in system consists of shear beams (3,250 mm long) and shear sleepers (107 mm long) with a height of 80 mm. The sleepers are inserted into each other at the required sleeper spacing depending on the roof pitch and construction height. Excess water is stored and drained away underneath the system using the Structured Storage Fleece SSV 800.
Ecological value | |
Maintenance costs | |
Costs* | with Vegetation mat: from approx. 74 €/m2 |
* Standard cost value for 1,000 m², net incl. installation, material varies from region to region.
System structure pitched roof system T
Note: Click on the marked points to get more information!
Vegetation mat
- Pre-cultivated sedum mat for rapid establishment of vegetation, with decomposable carrier (up to 15°) or with non-decomposable carrier (above 15°)
- learn more: Vegetation mat
Anti-slip system T
- Prevents slippage of the green roof structure and stabilises the substrate layer
- learn more: Anti-slip system T
Extensive substrate E (80 mm)
- A substrate with high water storage capacity and good air porosity, tailored to pitched extensive systems.
- learn more: Extensive Substrate E
Structured storage fleece SSV 800
- Protects the roof membrane against damage
- Suitable for water storage and targeted discharge of surplus water, especially at the eaves
- learn more: Structured storage fleece SSV 800
statically effective eave
- e. g. Optigrün cleat and eaves profile
Technical specifications
Weight* | from 120 kg/m² or 1.2 kN/m² |
Layer height | from 100 mm |
Roof pitch | 15-45° |
Vegetation form | sedum-(herbs-grasses) |
Discharge coefficient | Cs = 0.7 |
Water storage | from 30 l/m² |
* Depending on the load capacity of the substructure, Optigrün "High Density (HD)" or "Low Density (LD)" substrates can be used. Weight specifications refer to saturated conditions; dry weight is approximately 60 - 70 % of the saturated weight.
Downloads
- Checklist (pdf) 83 KB
- CAD-Drawing (pdf) 654 KB
- CAD-Drawing (dwg) 4 MB