Railing System GFS
The railing GFS serves as an enclosure / lateral demarcation of escape routes and assembly points. The GFS guardrail is a load-bearing system. The required load comes from the weight of the green roof system, the covering structure or from counterweights. This has the advantage that no intervention in the roof waterproofing is required and no weak points can occur in the roof waterproofing either during installation or use. This also means that no warranty regulations are affected
Product properties
| Material | Aluminium |
| Load | Green roof structure with fleece for load-bearing (min. 96 kg/m² dry weight) or counterweights (25 kg/each). Or with rail system to support the concrete slab covering |
| Height of handrail above top edge of decking/substrate | 1,100 mm |
| Horizontal load | 0.3kN/m as lateral enclosure of the escape route, 0.5kN/m as lateral enclosure of the assembly point |
| Total height | 1.10 - 1.25 m |
| Supports | straight |
Area of use
- Safety railing in accordance with DIN 14094-2
- For escape routes and assembly points
- On green and gravelled flat roofs with 0-5° roof pitch
Specific properties
- Can be designed as a single-sided or double-sided railing construction
- Standard path widths of 1.0 - 1.5 m
- Load-bearing capacity (combination with a layer structure approved by the manufacturer required)
- No penetration of the roof waterproofing required
- Maintenance-free
Good to know
- Cantilever rails: 1.30 -1.54 m
Accessories
- Additional knee rail or door
- Powder coating in standard RAL colors possible