Fall protection system OPTISAFE OSP
Load-supported single anchor point in accordance with EN 795:2012 type E for use with personal protective equipment (PPE). For maintenance, care and servicing work.
The system is fully supported by the ballast of the green roof system or gravel roof without penetrating the roof waterproofing. This means there are no weak points in the waterproofing.
Single anchor point in accordance with EN 795:2012 Type E for securing with personal protective equipment against falls from a height (PPE)
Tested and certified for 1 person + rescuer per anchor point
On green or gravelled flat roofs with 0-5° roof pitch
Required load: 80 kg/m² dry weight
Product properties
| Material | VA stainless steel |
| Fleece size | 9 m² |
| Required load | 80 kg/ m² dry weight |
| Required installation space/post | 3x3m => 9m² |
Area of use
- Single anchorage point in accordance with EN 795: 2012 Type E for securing with personal fall protection equipment (PPE)
- For fall protection during maintenance, care and repair work
- On green or gravelled flat roofs with 0-5° roof pitch
- Tested and certified for 1 person + 1 rescuer per anchor point
Specific properties
- No penetration of the roof waterproofing required
- Optisafe base element OSG consisting of base plate, post and safety fleece, completely pre-assembled
- Attachment of the Optisafe anchor eye OSA using a self-locking nut
- Safety fleece UV-stabilized, service life installed min. 100 years
- Fleece cut-out possible after consultation with the manufacturer
Accessories
- Optisafe access protection OSZ
Good to know
- Post distance from warm roof to edge of fall at least 2.50 m
- Post distance from inverted roof to edge of fall at least 4.00 m
- Post height 30 cm
- Annual inspection by an expert required