ANCHOR DEVICE OPTISAFE OSP
Anchor Device
In accordance with EN 795:2012 type E
Anchor device for securing with personal protective equipment against falls from a height (PPE) during maintenance, care and servicing work, held by superimposed load. Fleece size 9 m² (3 x 3 m), required superimposed load 80 kg/m² dry weight. Consisting of Optisafe Base Element OSG and Optisafe Anchor Point OSA 30°.
Product properties
| Safty fleece | 9 m² (3,000 x 3,000 mm) |
| Required superimposed | 80 kg/ m² dry weight |
| Base plate | VA stainless steel |
| Dimensions: 720 x 720 mm | |
| Post | V2A stainless steel |
| Height: 300 mm |
Area of use
- Anchor device according to EN 795:2012 type E for securing with personal protective equipment against falls from a height (PPE) with carabiner and eyelet
- For fall protection during maintenance, care and servicing work
- On greened or gravelled flat roofs with a roof pitch of 0-5°
- Held by superimposed load, combination with a system build-up approved by the manufacturer required
- Tested and certified for 1 person + 1 rescuer
Specific properties
- No penetration of the roof waterproofing required
- Optisafe Base Element OSG consisting of base plate, posts and safety fleece, completely pre-assembled
- Mounting of Optisafe Anchor Point OSA with self-locking nuts
- Safety fleece UV-stabilised, durability at least 100 years when installed
- Fleece cut-out possible after consultation with the manufacturer
Accessories
- Optisafe Access Securing OSZ